Wall Groove Cuttting Machine:

vibrovibro

Wall Groove Cutting Machine:

Power Supply:

a. Groove Cutting Machine to be connected to single phase 220 volts,AC, 5oHz power supply.

b. This machine is provided with 3 metres 3 core wire. Out of which red wire is to be connected with pahse of the power supply, black to the neutral and yellow to the earth.

Cutting Operation:

a. Make a mark with wet chalk on the palce where groove is needed to a width of 30mm.

b. Wet the wall with water on the wall in the previous night for best result.

c. Hold the machine in such a way that ON/OFF switch on the top side.

d. Place the bottom roller on the wall and Gently press the switch and the machine against the wall and allow to take groove slowly.

e. Press the machine in such a way that both the rollers to slide on the wall and allow the machine to get down slowly with respect to the chalk mark by gravity itself.

f. Now you can get a groove of 32mm wide and 32mm depth.

g. Similarly for horizontal grooves also allow the machine to take groove towards left.

Customer Care

Customer Care:  
99449 36703, 04.
Phone: +91-422-2437208, 2436129
Fax : +91-422-2452104
E-mail : enquiry@brickmachineries.in

Contact

LAKSHMI & CO
30, Amman Kovil Street,
Venkatapuram, G.C.T. Post,
Coimbatore-641004.
Tamil Nadu. India.

Cutter size:

             32mm wide X 80 mm dia.

Groove size:

             1 metre/minute.

Gooving Speed:

             32mm wide X 80 mm dia.

Salient Features:

            1. Cuts cost- One Building - One Machine Free.

2. Saves Manual labour.

3. Neat grooves.

4. High Perfomance.

5. Heavy Duty.

6. Easy Maintenance.

7. The essential machine for a perfect groove.

8. Light and handy.

9. A Power of 800 Watts at your service.

10. Excellent electric insulation.

11. A strong aluminium construction.

12. Agreeable features and built-in-realiability.